You may also like
Highlights
- Single Heat-Up Extraction: Finishes a full bowl from one heat cycle.
- Visual Temperature Gauge: A pointer and click indicators show when the head is up to heat.
- Zirconia Ball Matrix: 3mm zirconia balls hold heat and deliver mostly convection vapor.
- Three Bowl Positions: Set the screen for about 0.1g, 0.15g or 0.2g.
- Adjustable Air Port: High airflow through an easy-to-clean stem with a medium cooling unit.
- Swappable Balls: Change ball material to tune heat retention and extraction.
- Induction or Torch: Works with the YLL 3.0 and iSpire Wand, or a torch.
- 10, 14 and 18mm WPA Fit: Connects to water pipes through common adapter sizes.
In the Box
- Tempest 2: The titanium vaporizer with its heat shield.
- 3mm Zirconia Balls: Installed in the head, plus a few spares.
- Medium (Long) Cooling Unit: Cools vapor on the way to the mouthpiece.
- 4 Spare O-Rings: Three 6x1 and one 8x1.
- 2 Bowl Screens: Replacements for the adjustable bowl screen.
- 2 Ball Screens: Replacements for the twist-to-lock ball screen.
- Bowl Screen Tube: Sets the bowl screen to its position.
- Bowl Screen Tool: For removing and fitting the bowl screen.
- 2mm Screwdriver Bit: For the cap screw.
Description
The Mad Heaters Tempest 2 Dry Herb Vaporizer is battery-free, machined from Grade 5 titanium and heated from outside, with a head full of 3mm zirconia balls that store heat and pass it to the herb mostly by convection. This ball vaporizer extracts a full bowl in a single heat-up, and a visual temperature gauge with click indicators tells you when it is ready.
Unlike desktop ball vape setups that run from a coil and controller, it heats with a handheld torch or an induction heater. The YLL Induction Heater 3.0 and the iSpire Wand are compatible induction heaters, and a thicker induction sleeve on this version helps it hold heat under a torch. The bowl screen sets to about 0.1g, 0.15g or 0.2g, the stem has an adjustable air port and a medium cooling unit, and the balls can be swapped for other materials to change heat retention. It fits 10mm, 14mm and 18mm water pipe adapters, and it is for dry herb only.
FAQs
- Does it need batteries? No. It has no battery or electronics, and all heat comes from a torch or an induction heater.
- Which induction heaters work with it? The YLL 3.0 and the iSpire Wand. Some Wands have an opening narrower than the 14.0mm the Tempest 2 needs, so check yours first.
- How much herb does the bowl hold? About 0.1g, 0.15g or 0.2g, depending on which of the three screen positions you set.
- Can I use it with a water pipe? Yes. It fits 10mm, 14mm and 18mm water pipe adapters.
- How is it different from the Tempest 2 Slim? The Tempest 2 Slim is narrower at 14.5mm against 18.5mm, adds a 0.05g bowl position and takes 10mm adapters only.
- Why is the cap changing color? The cap discolors near the heated induction sleeve from high heat, which is expected.
Total beginner? Read this
- External heat: You heat the head with a torch or induction heater until the gauge shows it is ready, then draw.
- Ball matrix: The zirconia balls soak up heat and release it into the air you pull through the herb.
- Grind fine: Ground dry herb fills the bowl; set the screen position to match your load.
- First use: Clean the parts and loosen then retighten the cap screw before your first session.
- Hot surfaces: The head gets hot enough to burn, so let it cool before handling.
Specs
- Material: Grade 5 titanium; aluminum, wood or Ti heat shield by color; stainless steel induction sleeve, indicator housing, indicators and screens
- Heating: External: torch or induction (iSpire Wand, YLL 3.0)
- Heat style: Convection-heavy, zirconia ball-filled thermal matrix
- Bowl size: About 0.1g, 0.15g or 0.2g
- Temperature indicator: Visual gauge with click indicators
- WPA compatibility: 10mm, 14mm, 18mm
- Size: 122mm x 18.5mm
- Weight: 46g with aluminum heat shield, 43g with wood
- Use: Dry herb only