Puffco Peak (New)

In stock

$250.00

Orders placed on weekdays before 12pm (US Eastern Time) usually ship the same day. Orders placed on weekends and holidays ship on the following business day.
Packages typically take 1-5 business days to arrive depending on the destination. We have warehouses in TX, NJ, and CA.
We use discreet packaging with plain shipping boxes and no indication on whats inside.

Are you an authorized dealer?
Yes. We're an authorized dealer for every product we sell. This ensures you're fully eligible for the manufacturer’s warranty and support.

What currency are your prices listed in?
Since we're a U.S.–based company, all prices are listed in USD.

Where do you ship to?
We offer international shipping.

Where do you ship from?
We ship from our warehouses located in Texas, New Jersey, and California.

Do you require signature upon delivery?
Typically not, but we may require signature for some high value orders.

Highlights

3D Chamber: Heat traces in the ceramic walls vaporize concentrate from the sides.
Joystick Cap: Rotate it while you draw to direct airflow around the chamber.
Real-Time Temperature Control: Sensors hold a consistent temperature inside the chamber.
4 Heat Settings: Blue 490°F, Green 510°F, Red 530°F, White 590°F.
Boost and Intensity Modes: Extend a hit by 15 seconds and 18°F, or run a dry-dab cycle.
Swappable Glass Top: Peak Glass 2.0 for water filtration, compatible with all Peak and Peak Pro tops.
Up to 35 Dabs per Charge: USB-C charging in about 2 hours, with a battery life LED.
2-Year Warranty: Covers the electronic base; the chamber is covered for 6 months.

In the Box

1 x Peak Base: Smart eRig base with single-button control.
1 x Peak Glass 2.0: Water-filtration glass top.
1 x Peak 3D Chamber: Ceramic concentrate chamber.
1 x Peak Joystick Cap: Directional airflow carb cap.
1 x Loading Tool: For placing concentrate.
Cotton Swabs: For chamber cleaning.
1 x USB-C Cable: For charging.
1 x Quick Start Guide: Setup and use.

Description

The Puffco Peak (also called the New Peak or Peak 2024) is a smart eRig from Puffco with a 3D Chamber, a Joystick Cap, and real-time temperature control. Sensors hold the chamber at the chosen heat, and a single button runs four preset heat settings from 490°F to 590°F.

The 3D Chamber heats concentrate from the ceramic walls instead of the bottom, and the Joystick Cap directs airflow as you rotate it. The Peak Glass 2.0 top adds water filtration and swaps with all Peak and Peak Pro tops. A full charge gives up to 35 heat cycles over USB-C. It has no app, no wireless charging, and a medium-size chamber, so heavier users may prefer the Peak Pro.

FAQs

How many dabs per charge? Up to 35 heat cycles on the green setting. Higher settings use more battery. A full charge takes about 2 hours over USB-C.
What are the heat settings? Blue (Low) 490°F, Green (Medium) 510°F, Red (High) 530°F, and White (Peak) 590°F. Click once to cycle through them.
What is Boost Mode? After the Peak heats up, double-click to add 15 seconds and 18°F to the heat cycle. You can boost again as needed.
How do I clean it? Swab the chamber with a cotton swab after each use while it is warm. For a deep clean, soak the chamber in 90%+ isopropyl alcohol for 20 minutes, never water. Soak the glass in isopropyl, rinse with water, and let everything dry fully.
Can I replace the chamber? Yes. The chamber unscrews from the base, and Peak 3D Chambers are sold as replacements with a Joystick Cap.
How is it different from the Peak Pro? The Peak Pro adds Bluetooth app control, Qi wireless charging, and a larger chamber. The Peak keeps the same real-time temperature control with a simpler one-button setup.
What warranty does it have? 2 years on the electronic base and 6 months on the chamber. Glass is not covered.

Total beginner? Read this

What an eRig is: An electric dab rig. A battery heats a chamber for concentrates instead of a torch and banger, and the vapor passes through water in the glass.
Fill the glass first: Remove the glass top and fill it through the mouthpiece to just above the perc holes. Keep water out of the lower section.
Load it right: Use the loading tool to place concentrate on the bottom surface of the chamber, not the sides. Do not overfill.
Start a heat cycle: Pick a setting with a single click, place the Joystick Cap on the chamber, then double-click. The Peak flashes and vibrates twice when ready.
Draw gently: Inhale slowly while rotating the Joystick. Hard draws can pull water into the chamber, and you should never blow back into the glass.
Start low: Blue gives the most flavor and the least vapor. Step up to Green or Red for more vapor.

Specs

Compatibility: Concentrates
Chamber: Peak 3D Chamber, ceramic with side-wall heating
Heat settings: 4 presets: 490°F, 510°F, 530°F, 590°F
Temperature control: Real-time
Heat-up time: About 25 seconds
Heat cycle: About 40 seconds, with Boost Mode
Extra modes: Boost Mode and Intensity Mode for dry dabs
Controls: Single button with LED and haptic feedback
Battery: Up to 35 heat cycles per charge
Charging: USB-C, about 2 hours
Glass: Peak Glass 2.0, swappable with Peak and Peak Pro tops
Cap: Joystick Cap
Warranty: 2 years on the base, 6 months on the chamber
Colors: Onyx, Zest, Sapphire

Puffco Peak vs Puffco Peak Pro 3DXL

Spec	Puffco Peak	Puffco Peak Pro 3DXL
Chamber	3D Chamber, medium bowl	3DXL Chamber, extra large bowl
Heat settings	4 presets	4 presets plus custom
App control	No	Yes
Temperature control	Real-time	Real-time
Heat-up time	About 25 seconds	About 20 seconds
Heat cycle	About 40 seconds	About 40 seconds plus custom
Battery	Up to 35 heat cycles	Up to 30 heat cycles
Charge time	About 2 hours	About 2 hours
Wireless Qi charging	No	Yes
Carrying case	No	Yes
Warranty	2 years on the base	2 years on the base