You may also like
Highlights
- 3D Ceramic Heater: Warmth comes from the base and side walls together.
- Four Color Settings: Blue, Green, White and Red map to 210C, 220C, 240C and 260C.
- Long Runtime: The 2700mAh cell delivers up to 14 sessions per charge.
- Plug and Dab: Pass-through charging keeps it working while connected to USB-C power.
- Haptic Control: A single button handles everything and vibrates to confirm each press.
- Timed Sessions: Each heat cycle lasts 100 seconds.
In the Box
- TUG 2.0 Base: Holds the battery, button and heater connection.
- 3D Ceramic Heater: The chamber where concentrate is loaded and vaporized.
- Glass Bubbler: Borosilicate top that filters vapor through water.
- Vortex Carb Cap: Covers the chamber to control airflow during a dab.
- Ruby Terp Pearls x2: Spin in the chamber to spread heat across the concentrate.
- Dab Tool: Picks up concentrate and loads it into the heater.
- USB Cable: Recharges the base.
- Cleaning Supplies: For wiping out the heater and glass between sessions.
- Protective Case: Stores and protects the kit for travel.
Description
The Crossing TUG 2.0 is a portable electric dab rig from Crossing that heats concentrates in a 3D ceramic heater warming both the floor and side walls. One button runs it, with haptic feedback to confirm each input, and a borosilicate glass bubbler sits on top for water filtration.
Four heat levels are set by color: Blue at 210C, Green at 220C, White at 240C and Red at 260C. Each session lasts 100 seconds, and the 2700mAh internal battery gives up to 14 sessions on a full charge. Charging is over USB-C and takes about 1 hour 30 minutes to 1 hour 45 minutes, and pass-through charging lets you keep dabbing while it is plugged in.
The kit weighs 290 g and comes with a vortex carb cap, two ruby terp pearls, a dab tool, cleaning supplies and a protective case. It sits with our other eRigs.
FAQs
- What temperatures does the TUG 2.0 use? Four levels: Blue 210C, Green 220C, White 240C and Red 260C.
- How many sessions per charge? Up to 14 sessions from the 2700mAh battery.
- Can I use it while charging? Yes. Pass-through charging lets you dab while it is plugged in over USB-C.
- How long is one session? Each session runs for 100 seconds.
- How long does it take to charge? About 1 hour 30 minutes to 1 hour 45 minutes over USB-C.
- What is in the box? The base, 3D ceramic heater, glass bubbler, vortex carb cap, two ruby terp pearls, dab tool, USB cable, cleaning supplies and a protective case.
Total beginner? Read this
- An eRig is a battery-powered dab rig, so there is no torch or open flame.
- Use the dab tool to place a little concentrate in the ceramic heater.
- The color of the light shows which of the four heat levels is selected.
- Water in the glass bubbler cools and filters the vapor before you inhale.
- The carb cap goes on top of the heater while you draw to control airflow.
Specs
- Heater: 3D ceramic, heats base and side walls
- Heating method: Conduction
- Chamber material: Ceramic
- Temperature control: 4 preset levels (not precise)
- Heat settings: Blue 210C, Green 220C, White 240C, Red 260C
- Session length: 100 seconds
- Sessions per charge: Up to 14
- Battery: Internal, 2700mAh
- Charging: USB-C, about 1 h 30 min to 1 h 45 min
- Pass-through charging: Yes
- Display: LED
- Vibration feedback: Yes
- Session mode: Yes
- Mouthpiece: Glass
- Glass compatible: Yes
- 510 thread: No
- Smartphone app: No
- Compatible with: Concentrate
- Weight: 290 g (kit)